MJII Series (90-320 tons)
|
 |
Features:
|
MODEL |
MJ II SERIES 90 - 320 Tons | ||
Injection Unit | |||
| Screw diameter | in | 1.10 - 2.44 | |
| Screw stroke | 4.33 - 14.6 | ||
| Theoretical injection volume | cu. in | 4.1 - 68.3 | |
| Injection weight | (PS) | oz | 2.2 - 36.3 |
| (PE) | | ||
| Injection pressure | psi | 28446 - 25744 | |
| Injection rate | Standard | cu. in/ sec | 8.5 - 19.8 |
| Option | 17.4 - 40.9 | ||
| Plasticizing capacity (PS) | lbs/hr | 101 - 518 | |
| Screw rotation speed | rpm | 380 - 225 | |
Clamp Unit | |||
| Mold clamping force | U.S. ton | 88 - 320 | |
| Mold opening force | 6.6 - 15.4 | ||
| Mold closing speed | ft/min | 173.9 - 170.6 | |
| Mold opening speed | 173.9 - 173.9 | ||
| Platen size (HxV) | in | 22.05 x 22.05 - 37.4 x 37.4 | |
| Distance between tie rods | 14.96 x 14.96 - 25.98 x 25.98 | ||
| Clamp stroke | 17.7 - 29.9 | ||
| Maximum daylight | - |
24.8 - 41.7 | |
| Minimum mold thickness | 7.1 - 11.8 | ||
| Ejection | Ejector force | U.S. ton | 3.3 - 6.8 |
| Ejector stroke | in | 3.1 - 4.9 | |
| Ejector speed | ft/min | 49.2 - 49.2 | |
General | |||
| Motor for pump | HP | 20 - 50 | |
| Heater capacity | KW | 4.8 - 15.4 | |
| Hydraulic oil reservoir capacity | U.S. gal | 64 - 159 | |
| Overall dimensions (LxWxH) | ft (in) | (168.4 x 43.3 x 65.7 - 265.9 x 58.6 x 81.1) | |
| Weight | lbs | 9040 - 26010 | |
MJ Series | MM III Series | MMJ Series | MSJ Series | ME Series | em Series | MEt Series