MJ Series (390-1200 tons) Fully Hydraulic Direct Clamp Type Featuring the Highly Regarded MAC-VI COLOR CRT CONTROLLER

Features: Closed-Loop Control of Injection Speed and Hold Pressure PID Temperature Control with Auto-Tune UB Screw -Superior Color Dispersion and Homogeneous Melt Jet Purge System for Fast Material Changes

MODEL			MJ SERIES 390 - 950 Tons
Injection Unit
Screw diameter		in	2.44 - 4.72
Screw stroke			­
Theoretical injection volume		cu. in	68.3 - 413.7
Injection	(PS)	oz	36.3 - 220
weight	(PE)		29.3 - 177
Injection pressure		psi	25740 - 25670
Injection	Standard	cu. in/	21.4 - 53.4
rate	Option	sec	36.6 - 68.8
Plasticizing capacity (PS)		lbs/hr	606 - 1157
Screw rotation speed		rpm	172/265 - 45/69/89
Clamp Unit
Mold clamping force		U.S. ton	385 - 935
Mold opening force			24.7 - 66.7
Mold closing speed		ft/min	131.2 - 114.8
Mold opening speed			128.0 - 111.5
Platen size (HxV)		in	40.2 x 40.2 - 60.2 x 60.2
Distance between tie rods			28.7 x 28.7 - 41.7 x 41.7
Clamp stroke			37.4 - 63
Maximum daylight		-	49.2 - 82.7
Minimum mold thickness			11.8 - 19.7
Ejection	Ejector force	U.S. ton	9.1 - 22.3
	Ejector stroke	in	4.9 - 7.9
	Ejector speed	ft/min	­
Motor for pump		HP	60 - 75 + 75
General
Heater capacity		KW	15.5 - 53.5
Hydraulic oil reservoir capacity		U.S. gal	237.8 - 594.4
Overall dimensions (LxWxH)		ft (in)	25.6 x 6.2 x 6.2 - 40.4 x 8.2 x 7.5
Weight		lbs	33300 - 94100

MJII Series | MM III Series | MMJ Series | MSJ Series | ME Series | em Series | MEt Series